Views: 5 Author: Site Editor Publish Time: 2022-10-26 Origin: Site
1 The equipment is designed according to relevant regulations, and safety requirements have been considered in the overall design, but improper operation may cause harm to the operator. Therefore, the operator must act in accordance with the safety regulations and operation and maintenance regulations to eliminate all risk factors during operation.
2. The purpose of this manual is to enable users to use the set of spinning equipment with high efficiency and long service life. At the same time, necessary measures should be taken to prevent accidents. Therefore, the user should conduct necessary training for operators and maintenance personnel before using the machine. Please read this manual carefully. Electrical maintenance personnel must be trained and authorized.
3. Please wear tight protective clothing, do not wear jewelry, do not leave long hair to avoid being caught by moving parts.
4. Please wear non slip shoes.
5. Do not use a part of the machine as a ladder for climbing. If the working position is high, please use a safe and reliable ladder or operating platform.
6. Do not operate the machine after drinking or taking drugs with side effects.
7.Keep the working area clean and tidy, and the environment in the working area is chaotic, which may cause accidents.
8. When working in dangerous areas, always be alert.
9.Personnel not related to the work shall not enter the work area.
10. When operating this machine, please use appropriate accessories, such as silk hook, scissors, etc.
11. During installation or removal, please use the installation and removal tool.
12.When transporting the machine, confirm the weight and center of gravity, so that the machine can be transported smoothly.
13. Repair and maintenance must be carried out in the state of complete shutdown, and it is not allowed to repair and maintain before the moving parts are completely stopped; in addition, in the process of repair and maintenance, the machine should be prevented from being started accidentally, and the main switch should be locked.
14. Check the machine before start-up. If abnormal operation of the machine is found, it should be reported to the maintenance personnel, staff and supervisors. Unauthorized operation is not allowed.
15. This set of equipment is fixed on the base of the packing box. When disassembling, use a crane or other safe means to lift the upper lifting ring, lift the machine from the base of the packing box and place it on the flat ground. Then, use a special trolley to safely drag the machine to the rack for installation.
Attention: confirm the weight and center of gravity of the machine, keep balance, and prevent bumping and rope squeezing vulnerable parts.
If the equipment needs to be stored, the storage period should be two years, and the storage temperature must be 15 ~ 25 ℃. To prevent corrosion, the relative humidity should be less than 60% and covered with plastic cloth.