AATCC 201 Drying Rate Tester for Fabric Testing Equipment DW290B is used to measure the drying rate of fabric according to AATCC 201 requirements to determinate the fabric’s quick drying performance.
DW290B
FYI
White or Black
1PCS
China
Availability: | |
---|---|
AATCC 201 Drying Rate Tester for Fabric Testing Equipment DW290B is used to measure the
drying rate of fabric according to AATCC 201 requirements to determinate the fabric’s
quick drying performance.The drying rate tester is connected with the high-precision moisture
meter by special software.Test reports can be saved automatically and printed out.
ISO 9237 | AATCC 201 |
Note: AATCC 201 Drying Rate Tester can conform to but not limit to the standards above, for more standards conformance, please contact us.
1. Special test software can connect up to six balances for simultaneous testing.
2. Data can be transferred from balance to software through USB cable.
3. Testing progress can be observed through software and displayed by curves and tables.
4 The stop conditions can be set through software:
1) According to the test time: The test will stop automatically when it reaches the set time.
2) According to the dry percentage:
Ø The change rate of the mass measured for two consecutive times shall not exceed 1%;
Ø The difference between the quality and the original quality of the specimen before adding water shall not be more than 2%.
3) According to residual water content percentage: the test will stop automatically when the residual water content percentage reaches the set value.
5. Test reports can be saved automatically and printed out.
6. Two kinds of specimen racks can be provided: vertical hanging specimen rack and horizontal specimen rack.
KEY SPECIFICATIONS
Test software | Can connect up to six balances for simultaneous testing |
Test interface | Display data, curves and tables |
Test stop conditions | According to the test time, dry percentage or residual water content percentage |
Test report | Automatically saved and can be printed out by printer |
Communication interface | USB |
Specimen rack | Vertical hanging or horizontal specimen rack |
AATCC 201 Drying Rate Tester for Fabric Testing Equipment DW290B is used to measure the
drying rate of fabric according to AATCC 201 requirements to determinate the fabric’s
quick drying performance.The drying rate tester is connected with the high-precision moisture
meter by special software.Test reports can be saved automatically and printed out.
ISO 9237 | AATCC 201 |
Note: AATCC 201 Drying Rate Tester can conform to but not limit to the standards above, for more standards conformance, please contact us.
1. Special test software can connect up to six balances for simultaneous testing.
2. Data can be transferred from balance to software through USB cable.
3. Testing progress can be observed through software and displayed by curves and tables.
4 The stop conditions can be set through software:
1) According to the test time: The test will stop automatically when it reaches the set time.
2) According to the dry percentage:
Ø The change rate of the mass measured for two consecutive times shall not exceed 1%;
Ø The difference between the quality and the original quality of the specimen before adding water shall not be more than 2%.
3) According to residual water content percentage: the test will stop automatically when the residual water content percentage reaches the set value.
5. Test reports can be saved automatically and printed out.
6. Two kinds of specimen racks can be provided: vertical hanging specimen rack and horizontal specimen rack.
KEY SPECIFICATIONS
Test software | Can connect up to six balances for simultaneous testing |
Test interface | Display data, curves and tables |
Test stop conditions | According to the test time, dry percentage or residual water content percentage |
Test report | Automatically saved and can be printed out by printer |
Communication interface | USB |
Specimen rack | Vertical hanging or horizontal specimen rack |